What details should be paid attention to when choosing a glass edging machine?

As a necessary machine for glass deep processing, the glass edging machine is relatively large in appearance, so the price of the edging machine is relatively high. The prices on the market are similar, but due to the low-season glass market last year, glass edging machines have also been further developed.

Now, let me share with you the details about the purchase of the edging machine, where should we start to observe and review whether the edging machine is of reliable quality.

First of all, let us review the basic structure of the edging machine. The main unit, the guide rail at the inlet and outlet ends, the glass support frame, and the floor water tank are the basic components. The host can be divided into front beam, rear beam, base, column, motor, electric box, grinding wheel water tank.

In this way, it is very clear where the quality inspection of the second-hand edging machine should be started before purchase. The standard quality requirements require that the front and rear beams must be flat, and they need to have wear resistance, heat resistance and oxidation resistance, so that the second-hand edger will not be deformed during high-temperature operation. Moreover, as the load-bearing location of the edging machine, the base also needs to have the same performance as the front and rear beams to ensure the quality of glass edging. At the same time, second-hand edging machines have the highest requirements for the grinding head, and the quality of the grinding head directly affects the quality of the glass after deep processing.

After many years of experience in maintenance and maintenance, you need to pay special attention to all parts when purchasing a second-hand edging machine, especially parts that require high wear resistance and oxygen resistance must be cast parts, and welded parts need to be particularly rigid , In order to make the second-hand edge grinding machine not have major failures during long-term use, and there will be no parts separation, looseness, etc.

Finally, you need to pay special attention to the motor. The motor with high shaft runout accuracy and strong waterproof ability can better ensure the quality of glass deep processing. The thickness of the motor grinding plate and the quality of the motor itself belong to the binding effect. The cost of the thick grinding plate is much higher than that of the thin plate, so pay attention to inspection. It is recommended to buy a motor made of copper wire, the bearing is better and waterproof.